virtual

The 3rd International Electronic Conference on Applied Sciences

Name: The 3rd International Electronic Conference on Applied Sciences
Start: 2022-12-01
End: 2022-12-15

01 - 15 December 2022 (CET)

Online

Event Announcement

On behalf of the conference team of the 3rd International Electronic Conference on Applied Sciences, we would like to thank you for your participation by sending your contributions, being posters, slideshows or video presentations. We hope you've enjoyed it.

See you in the next edition!

Welcome from
the chairs

Welcome from the Conference Chairs of the 3rd International Electronic Conference on Applied Sciences

We are pleased to announce the 3rd International Electronic Conference on Applied Sciences. This international conference, supported by the journal Applied Sciences, unites scientists from different areas to discuss important recent developments in a number of fields. It represents an opportunity to gather an interdisciplinary community to discuss applied sciences. More specifically, after the success of the first two editions, this year’s edition will focus on eleven thematic areas of applied nature sciences:

Posters can be presented without an accompanying proceedings paper and will be available on this website during and after the e-conference.

Participants will have the opportunity to examine, explore and critically engage with issues and advances in these areas. We hope to facilitate discussions and exchange within the community.

A student competition will also be held online for selected students' contributions (students as correspondences). These will be exhibited in the Student Session. For more details, please click the following link: https://sciforum.net/event/ASEC2022#awards.

This event will take place entirely online, allowing participation from all over the world with no concerns regarding travel and related expenditures. An electronic conference provides a platform for rapid and direct exchanges about the latest research findings and novel ideas. Participation, as well as the "attendance" of this online conference, is free of charge.

The 3rd International Electronic Conference on Applied Sciences is sponsored by MDPI and the scientific journal Applied Sciences. The conference proceedings papers and presentations will be available on https://sciforum.net/event/ASEC2022 for discussion during 1–15 December 2022 and will be published in the journal Engineering Proceedings.

Extended and expanded versions of conference proceedings papers can be submitted to a Special Issue “Selected Papers from the 3rd International Electronic Conference on Applied Sciences” in the journal Applied Sciences after the conference, with a 20% discount on the Article Processing Charges.

Applied Sciences is an international, peer-reviewed, open access journal on all aspects of applied natural sciences. It is published semimonthly online by MDPI.

We hope the community will share our enthusiasm and help to make this 3rd edition a success, and that there will be many more conferences in the future.

Prof. Dr. Nunzio Cennamo and Prof. Dr. Yangquan Chen
The Chairs of the 3rd International Electronic Conference on Applied Sciences

Meet the Event Chairs

Prof. Dr. Nunzio Cennamo

Department of Engineering, University of Campania Luigi Vanvitelli, Aversa, Italy

Prof. Dr. Yangquan Chen

Department of Mechanical Engineering (ME), University of California, Merced, CA, USA

Important Dates

Abstract submission deadlineSep 19, 2022
Abstract acceptance notificationSep 26, 2022
Full file submission deadlineOct 27, 2022

Meet Our Speakers

View all speakers

Dr. Simeone Chianese

Department of Engineering, University of Campania “Luigi Vanvitelli”, 81031 Aversa, Italy;
Simeone Chianese, PhD, is an Assistant Professor of Chemical Plants at the Department of Engineering of the University of Campania “Luigi Vanvitelli” (Aversa, Italy). His areas of teaching include technologies for pollution control, waste management and treatment, gaseous emission treatment technologies, risk analysis and contaminated site remediation. His research interests include biomass gasification, supercritical water gasification, catalytic hydrogen production, syngas cleaning, micro-pollutant removal from aqueous streams, advanced wastewater treatment, advanced oxidation processes, innovative technologies for groundwater remediation, innovative technology for biofuel production, microalgal biomass growth and extraction of valuable by-products, CO2 capture through microalgae growth. Recently, he started new research activities for the investigation of hydrogen production at low temperature, pressurized anaerobic digestion and PHB production from biomass. He is co-author of more than 60 papers in international peer-reviewed scientific journals indexed by the main databases (Scopus and/or Web of Science) and more than 30 papers in international conferences.

Prof. Dr. Adriana Borriello

Department of Precision Medicine, University of Campania “L. Vanvitelli”, Naples, Italy;
Adriana Borriello (AB) got her Degree in Biological Sciences cum laude in 1991 at the University of Naples 'Federico II'. She obtained the PhD in Cellular Biochemistry in 1999 at the Second University of Naples (SUN), and a Specialty School in Clinical Biochemistry in 2007 (SUN). Since 2015, she is Associate Professor of Biochemistry at University of Campania “L. Vanvitelli, and since 2007, Biology Manager at the Policlinico Hospital (Vanvitelli University). She has obtained the National Scientific Qualification to the functions of Full Professor for the Sector 05/E1 General Biochemistry (31/03/2017). AB teaches Biochemistry at the Degree Course in Medicine and Surgery, based in Caserta, at the Degree Course in Medicine and Surgery in English Language, and at several Specialization Schools (Pediatrics, Nutritional Sciences and Clinical Biochemistry). Further teaching assignments are carried out in numerous Degree Courses for Health Professionals. Since 2008, she participates in the Board Committee of the Biochemical and Biotechnological Sciences PhD Course (Vanvitelli), where she has guided numerous PhD candidates in their researches. Some of them currently occupy a position (type A researchers, RTD-A) at the University of Campania. Reviewer and Editorial Board Member for international journals, such as CELLS, MDPI (IF: 7.7), Diseases (MDPI), Frontiers in Endocrinology and Frontiers in Oncology. Guest Editor for special issues in Cells and in Biosensors (MDPI). The results of her researches have been published in high-impact journals such as New England Journal of Medicine, Translational Oncology, Journal of Biological Chemistry, Journal of Clinical Oncology, Blood, Leukemia, Cancer Research, , Cancer Letters, and others. She is author of about 70 papers, published in peer-reviewed journals. Total IF: 824.237; average IF/paper: 8.8; total number of citations: 2417, H-index: 28 (Scopus).

Prof. Dr. Stefania Campopiano

Department of Engineering, Universita degli Studi di Napoli Parthenope, Naples, Italy;
Stefania Campopiano is Full Professor of Electronics at Department of Engineering, University of Napoli Parthenope. Her main research interests regard the design, realization and testing of novel in-fiber devices in standard and unconventional fibers for sensing applications. Important research outcomes are related to the exploitation of fiber optic sensors for the measurement of a range of physical, chemical, and biological parameters in different fields spanning from the structural health monitoring to the biomedical field.

Dr. Santosh Kumar

Shandong Key Laboratory of Optical Communication Science and Technology, School of Physics Science and Information Technology, Liaocheng University, Liaocheng, China;
Santosh Kumar received the Ph.D. degree from IIT (ISM) Dhanbad, Dhanbad, India. He is currently an Associate Professor with the School of Physics Science and Information Technology, Liaocheng University, Liaocheng, China. He has guided seven M.Tech. dissertations and six Ph.D. candidates. He has published more than 200 research articles in national and international SCI journals and conferences. He has presented many articles at conferences held in Belgium and USA. He has published two books entitled Fibre Optic Communication: Optical Waveguides, Devices and Applications (University Press, 2017), India, and another book entitled 2D Materials for Surface Plasmon Resonance-Based Sensors (CRC Press, Taylor & Francis Group, 2021). He has reviewed more than 1000 SCI journals of IEEE, Elsevier, Springer, OPTICA, SPIE, and Nature. His current research interests include optical fiber sensors, nano and biophotonics, photonic and plasmonic devices, and waveguide and interferometer. He is a Life Fellow Member of the Optical Society of India (OSI) and a Senior Member of IEEE, OPTICA and SPIE. He is also a Traveling Lecturer of OPTICA. He is also a Chair of Optica Optical Biosensors Technical Group. He has delivered many invited talks and serves as the session chair of IEEE conferences. Currently, he is the guest editor of special issues of Materials Journal (MDPI), Magnetochemistry Journal (MDPI), Photonics Journal (MDPI), Frontiers in Materials Journal and Frontiers in Physics. He is also an Associate Editor of the IEEE SENSORS JOURNAL, IEEE ACCESS, IEEE TRANSACTIONS ON NANOBIOSCIENCE, Frontiers in Physics, and Biomedical Optics Express.

Prof. Dr. Marco Annunziata

Multidisciplinary Department of Medical-Surgical and Dental Specialties, University of Campania “Luigi Vanvitelli”, 80138 Naples, Italy;
Marco Annunziata, DDS, PhD | Born in Naples in 1979. Degree in Dentistry “cum laude” in 2002 at the University of Naples “Federico II”. Ph.D. degree in “Biomedical Technologies Applied to the Odontostomatological Sciences” in 2005 and Research Fellow from 2006 to 2010 at the University of Campania “Luigi Vanvitelli”. Assistant Professor of Periodontology and Implantology from 2010 and Associate Professor at the same University from 2018. Physician Assistant at the Periodontology and Implantology Unit of the Department of Dentistry from 2011. Active Member and Board Member (General Secretary for 2013-2014) of the Italian Academy of Osseointagration (IAO). Author of book chapters and scientific papers on international peer reviewed journals of periodontology and implantology (50 papers, total citations 1041, H-index 21). Member of the editorial board and reviewer of several international journals. Main research fields: innovative materials and protocols in implant dentistry, periodontal and bone regenerative therapy, in vitro studies on primary periodontal cells and bone marrow mesenchymal stem cells, etiopathogenesis and therapy of periodontal disease.

Prof. Dr. Antonio d'Alessandro

Dept. of Information Engineering, Electronics and Telecommunications, Sapienza University of Rome, Rome, Italy;
Full Professor in Electronics since 2022 teaches the courses of Optoelectronics and Photonics for the Laurea Magistrale in Electronic Engineering and in Nanotechnology Engineering, Electronics and Optical Sensors for Laurea Magistrale (Msc) in Space and Astronautic Engineering. Vice Dean for International programs of the Faculty of Information Engineering, Informatics and Statistics. President of the Electronic Engineering Area Council since 2019. Director of CNIS, Center of Nanotechnologies applied to Engineering of Sapienza since 2018 Scientific responsible of Sapienza Nanotechnology and Nanoscience Laboratory - SNN Lab since 2018 and of the Optoelectronics Laboratory of Department of Information Engineering, Electronics and Telecommunications since 2002. President of IEEE Photonics Society - Italy Chapter since 2020. President of the Italian Liquid Crystal Society since 2010. Senior Member of IEEE and of the Optical Society of America (OSA). Associate Editor of IEEE Photonics Journal from 2015 to 2021 and special issue Editor of OPTICA Optics Express and Molecular Crystals and Liquid Crystals.

Dr. Luca Schenato

Research Institute for Geo-Hydrological Protection, Consiglio Nazionale delle Ricerche, 35127 Padova, Italy;
Luca Schenato received a B.Sc. degree in telecommunication engineering and a Ph.D. in electronic and telecommunication engineering from the University of Padova, Padova, Italy, in 2003 and 2007, respectively. He is currently a Researcher at the Italian National Research Council in Padova, Italy. His current research interests include optical fiber sensors, mainly for geotechnical and geo-hydrological applications, and optical fiber-based devices, about which he authored or co-authored over 100 research papers.

Dr. Patrizio Vaiano

Optoelectronic Division—Engineering Department, University of Sannio, 82100 Benevento, Italy;
Patrizio Vaiano received the Bachelor's Degree and the Master's Degree in Electronic Engineering from the University of Naples "Federico II" (Italy) respectively in 2011 and 2013. In January 2018 he obtained a Ph.D. in Information Technologies for Engineering at the University of Sannio, Benevento (Italy), focusing on the development of Lab-On-Fiber devices for biochemical detection with particular attention to long period fiber gratings. Since 2018 he is Postdoctoral research fellow at the Engineering Department of the University of Sannio. His current research activities concern the design and development of optical fiber-based devices for dosimetry, chemistry, biochemistry and environmental sensing applications.

Dr. Antreas Theodosiou

Photonics Research Center (PRC), Lumoscribe LTD;
Dr. Antreas Theodosiou is the director and founder of Lumoscribe LTD. He finished his PhD at the Cyprus University of Technology with a specialization in photonics and optical sensors. He holds an MBA and MSc with a specialization in communication systems. His research includes inscription and development of optical sensors using femtosecond laser systems, waveguides, Bragg gratings, Mach-Zehnders, Fabry-Perot cavities, in polymer, silica, and other novel optical materials, and various applications using optical fibre sensors. In addition, has experience working with demodulation algorithms for complicated Bragg gratings spectrums, and fibre lasers. Recently was awarded with the Cyprus Research Award – Distinguished Researcher “Physical Sciences & Engineering” 2021 by the Research and Innovation Foundation and the Cyprus government and 2020 SPIE Community Champion

Prof. Dr. Gianrico Spagnuolo

Department of Neuroscience, Reproductive and Odontostomatological Sciences University of Naples "Federico II", Naples, Italy;
Prof. Dr. Gianrico Spagnuolo received a D.D.S. degree and he completed his Ph.D. in Dental Materials Biotechnology at University of Naples “Federico II” (Italy). He had been Visiting Assistant Professor and Adjunct Scientist at the Department of Operative Dentistry and Periodontology at University of Regensburg (Germany). He was associate researcher at Interdisciplinary Research Centre on Biomaterials (CRIB) - University of Naples “Federico II” and he completed the three-year postgraduate program in Oral Surgery at the same University. He has served as Professor of Operative Dentistry at Sechenov University (Russia). Now he is Professor at School of Dentistry - University of Naples “Federico II” spending his time teaching and participating in the faculty practice in Endodontic, Operative Dentistry and Oral Surgery sections. Prof. Dr. Spagnuolo research is focused on the interaction between cell-tissue-materials at molecular and clinical levels.

Prof. Dr. Lúcia Bilro

Instituto de Telecomunicações, 3810-193 Aveiro, Portugal;
Lúcia Bilro, holds a PhD in Physics and a CEBT certificate in entrepreneurship. She is CTO and co-founder of WATGRID, a company with a strong technological and R&D component that includes a proprietary solution for smart, remote, and real time monitoring of wine production process - Winegrid®. She is also Researcher at Instituto de Telecomunicações (IT), board member of Portuguese Optical Society and member of organizing committee of several international conferences. She has supervised several MSc and PhD students and has co-authored >100 scientific papers, 8 book chapters and 8 patents related to sensing technology. Her research interests are optical sensors applied to food industry, liquid quality monitoring and environmental monitoring, IoT and industry 4.0.

Prof. Dr. Carlo Trigona

Dipartimento di Ingegneria Elettrica, Elettronica e Informatica, University of Catania, Viale Andrea Doria 6, 95125 Catania, Italy;

Prof. Dr. Yeon Sik Jung

Dept. of Materials Science and Engineering, KAIST, Korea;

Prof. Dr. Evangelos Hristoforou

Laboratory of Electronic Sensors, School of Electrical and Computer Engineering, National Technical University of Athen, 15780 Athens, Greece;

Dr. Olivier Soppera

Institute of Material Science of Mulhouse, CNRS UMR7361, 68057 Mulhouse, France;
Olivier Soppera is CNRS Research Director (DR1) at the Institute of Materials Science of Mulhouse (CNRS UMR 7361, Université de Haute-Alsace). He leads a research team at IS2M in the field of the development of micro and nanostructuring processes of functional materials by photochemical methods. This approach consists in using light to build and shape matter, in 2D/3D, by integrating functional materials. The approach is multi-scale (from single molecule reactions in near-field photochemistry to the fabrication of macroscopic objects in 3D printing), multi-material (polymer, hybrid, inorganic sol-gel, metallic nanoparticles). This research topic is by essence strongly interdisciplinary between (photo)chemistry, physical chemistry and physics (optics, photonics, electronics) and corresponds to an original positioning in growing field of light-matter interaction. He (co)authored 151 publications in international journals, 7 patents, gave 122 talks in conferences (25 invited talks). He received the CNRS Bronze medal in 2009.

Dr. Mario Casillo

Department of Industrial Engineering, University of Salerno, 84084 Fisciano, Italy;
Mario Casillo is currently an Associate Professor of Computer Science at the University of Salerno, Italy. He received his M.S. degree in Communication Engineering from the University of Naples "Federico II" (Italy), in 1998. He received his Ph.D. in Science and Technology Management from the University of Naples "Federico II" (Italy), in 2016. Since 2018 he is a Postdoctoral research fellow at the Industrial Engineering Department of the University of Salerno and collaborates with the "ICT Center for Cultural Heritage" of the University of Salerno. His current research interests include the Internet of Things, Predictive Maintenance, Recommender systems, Knowledge Management and Machine Learning. In such fields, he is co-author of more than 50 scientific articles, most of which were published in relevant international journals.

Prof. Dr. Daniele Tosi

1. Department of Computer and Electrical Engineering, Nazarbayev University, Kabanbay batyr, Nur-Sultan 010000, Kazakhstan 2. Laboratory of Biosensors and Bioinstruments, National Laboratory of Astana, Kabanbay batyr, Nur-Sultan 010000, Kazakhstan;
Daniele Tosi is an Associate Professor of Electrical and Computer Engineering at Nazarbayev University, and Head of Biosensors and Bioinstruments Laboratory at National Laboratory Astana. He is an Associate Editor of the IEEE Sensors Journal and the recipient of the IEEE Sensors Council Early Career Technical Award in 2018. He holds BSc (2004) and MSc (2006) in Telecommunication Engineering, and PhD (2010) in Electrical and Computer Engineering from Politecnico di Torino. His research interests include optical fiber sensors, biomedical sensors, distributed sensing, and biosensors.

Prof. Dr. Domenico Capriglione

Department of Electrical and Information Engineering, University of Cassino and Southern Lazio, 03043 Cassino, Italy;
Domenico Capriglione is currently an Associate Professor of electrical and electronic measurements with the University of Cassino and Southern Lazio, Italy. He received the M.S. degree (cum laude) in Electronic Engineering from the University of Salerno (Italy), in 2000. His current research interests include measurements on RF and telecommunication systems, DSP-based measurement systems, network measurements, measurement of electromagnetic compatibility, Instrument Fault Diagnosis. In such fields, he is co-author of more than 150 scientific articles, most of which were published in relevant international journals. Since 2016 is Chair of the IEEE Instrumentation and Measurement Society Technical Committee 37 - Measurements and Networking. This TC has been selected as Outstanding Technical Committee Award for the year 2019. Since 2022 serves as AE of the IEEE Instrumentation and Measurement Magazine.

Dr. Domenico Montemurro

Dipartimento di Fisica, Universitá degli Studi di Napoli Naples Federico II, 00103 Napoli, Italy;
Domenico Montemurro is currently Assistant professor (RTDA) at department of Physics “E.Pancini”, University of Naples Federico II (Italy). He gained his bachelor and master degree in Physics at University of Salerno (Italy) and University of Naples Federico II (Italy), respectively. He won the PhD position at Scuola Normale Superiore di Pisa - Italy (Alma Mater Prof. Enrico Fermi) developing the projects “A nanotechnological platform for hybrid superconducting nanojunctions based on semiconducting nanowires”. He spent almost four years at Chalmers University of Technology (Sweden) as post doc researcher conceiving the experiments, nanofabricating and characterizing at very low temperature (~10mK) and at high magnetic field (~14T) several layouts of nanostructures. Currently, at Naples University, his researcher activities fit in the field of Quantum Technologies.